Baileigh PL-1340E-1.0, Руководство оператора

Страница: 42 / 52

39
39
V-Belt Removal and Adjustment
Note: Always replace belts as a matched set of two.
V-belts will stretch through usage. Check the tension of the
belts every three months. More often if the lathe is used daily.
1. Remove the gear cover at the headstock end of the
machine to have access to the V-belts.
2. Loosen the two bolts as indicated by the arrow.
3. Slide the motor up to release tension on the belts so they
can be removed.
4. Place the new belts onto the pulleys and let the motor
down gently.
5. Push the center of each belt as shown. When properly
tensioned the amount of deflection should be
approximately 0.75” (19mm).
6. Retighten the motor base capscrews after adjusting or
replacing the belts.
7. Replace and secure the gear cover.
Deflection