8
8
25. Be sure
all
equipment is properly installed and grounded according to national, state, and
local codes.
26. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed.
Bare wiring can kill! DO NOT
touch live electrical components or parts.
27.
DO NOT
bypass or defeat any safety interlock systems.
28. Keep visitors a safe distance from the work area.
TECHNICAL SPECIFICATIONS
Drill Capacity
3/32” – 5/8” (2.5mm – 16mm)
Maximum Stroke
8.25” (210mm)
Cutter Depth
3” (75mm)
Annular Cutter Capacity
1/2"
– 2-3/8” (12mm – 60mm)
Spindle Holder
3/4" (19mm)
Magnetic Adhesion
18000N
No Load RPM
260/460
Power Requirements
110V 60hz 1850W (17A)
Shipping Weight
64lbs (29kgs)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
[email protected], Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
