Baileigh DP-4016B, Руководство оператора

Страница: 25 / 40

23
23
Drill Head and Worktable Adjustment
This drill press design allows for the head and the worktable to be adjusted and rotated as
needed to provide for a wide variety of drilling options.
Drill Head Adjustment
The drill head may be adjusted up and down and for rotation.
Note: Always use an assistant or lifting device to help raise or lower the drill head.
Do not allow the power cord to interfere with the drill spindle in any way.
Elevation
1. Loosen the socket head screw (A) on the retaining ring.
2. Loosen the head to column clamping bolt (B, located on the opposite side).
3. Raise or lower the head to the desired height.
4. Tighten the head to column clamping bolt (B).
5. Slide the retaining ring up tight to the bottom of the
drill head and securely tighten the socket head
screw (A).
6. Carefully release the column clamping bolt (B) to
remove any gap between the retaining ring and the
head. Tighten the column clamping bolt.
Rotation
1. Set the head elevation.
2. Loosen the head to column clamping bolt (B,
located on the opposite side).
3. Rotate the head as desired.
4. Tighten the head to column clamping bolt (B).
NOTICE: Use care to maintain load balance when rotating the head and/or the table. When
applying downward pressure during the drilling process, a poorly secured work piece may
come loose and fall or rotate causing material or equipment damage.
WARNING:
Failure to lock the head
bolt can result in damage of the machine and
personal injury.
C
B
D
E
A