Baileigh Industrial ES-6108, Руководство оператора

Страница: 21 / 40

19
19
WORK TABLE TILTING TO SLANT ANGLE ADJUSTMENT
1. Place the workpiece on the working table.
2. Loosen the hand levers (A) on the both
sides.
3. Swivel the table into the desired position
with the workpiece or by reading the
indictor scale (B).
4. When the table is at the desired angle,
tighten the hand levers (A).
5. The work table can be adjusted for
clearance to the sanding belt. If it is
required, loosen the cap screws (C) then
move the working table to desire position.
6. After adjustment, tighten the cap screws
(C).
MITER GAUGE ADJUSTMENT
The table miter gauge (A) angle can be
adjusted for the different workpiece angle
requirements.
Use the miter gauge graduated scale for
precise setting of the desired angle.
1. Loosen the lock handle (B).
2. Rotate the miter gauge into the desired
position by reading the indictor scale (C).
3. Tighten the lock handle (B). After the miter
gauge position is desired.
CAUTION:
Always wear proper eye protection with side shields, safety
footwear, and leather gloves to protect from, chips, dust, burrs, and slivers.
B A
C
C
A
B