Baileigh Industrial DC-6000C, Руководство оператора

Страница: 25 / 32

23
23
•
Improper connection of the equipment-grounding conductor can result in risk of electric
shock. The conductor with insulation having an outer surface that is green with or without
yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric
cord or plug is necessary, do not connect the equipment-grounding conductor to a live
terminal.
•
Check with a qualified electrician or service personnel if the grounding instructions are not
completely understood, or if in doubt as to whether the machine is properly grounded.
•
Repair or replace damaged or worn cord immediately.
Power cord connection:
1. Turn the main disconnect switch on the control panel to the OFF position.
2. Unwrap the power cord and route the cord away from the machine toward the power supply.
a. Route the power cord so that it will NOT become entangled in the machine in any
way.
b. Route the cord to the power supply is a way that does NOT create a trip hazard.
3. Connect the three power wires terminals L1, L2, & L3 to the
power supply or install the correct plug for the application onto
the power cord. Connect the ground wire (typically green) to the
E terminal.
4. When the machine is clear of any obstruction. The main power
switch may be turn ON to test the operation. Turn the switch OFF
when the machine is not in operation.
Check for correct rotation of the motor (Proper suction)
5. If not, disconnect power to the machine, and switch the L1 and L3
wires; but DO NOT change the position of the green grounding
wire!
WARNING:
In all cases, make certain the receptacle in question is
properly grounded. If you are not sure, have a qualified electrician check the
receptacle
.