6
6
33. Do not use this tool while tired or under the influence of drugs, alcohol or medication.
34. Keep bystanders, especially children, away from the area while using the vise.
35.
Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are careless
acts that can result in serious injury.
36. Maintain a balanced stance at all times. Do not overreach while performing the work.
WARNING: Always wear eye and face protection when striking vise-held objects or when using
power tools with the vise.
Read carefully and follow all safety rules and operating instructions before first use of this product.
SPECIFICATIONS
Jaw Width
4.5
” (114mm)
Maximum Jaw Opening
5” (127mm)
Throat Depth
2.59
” (66mm)
Pipe Jaw Capacity
.2
5” to 2” (6.35 to 50.8mm)
Jaw Insert Hardness
45-56 HRC
Clamping Force
6744lbf (30KN)
Weight, Net
17.4lbs (7.9kgs)
Carton Dimensions
13.39" x 7.09" x 8.66" (340 x 180 x 220mm)
Primary Materials
Steel and Ductile Iron
Paint Finish
Powder Coat Enamel
DESCRIPTION
4” Industrial Bench Vise with Pipe Jaws has a cast iron body and replaceable hardened steel jaws. The vise
features parallel jaws and pipe jaws. Vise will swivel 360° on the base and lock in any position. Anvil on the body of
vise provides a convenient work surface.
MAINTENANCE
•
Keep machined surfaces and all moving parts clean and free of dirt, chips and foreign materials. Particles of
metal or wood can damage machined surfaces, causing difficult or inaccurate operation.
•
Keep machined surfaces lubricated with medium weight machine oil.
•
Before use, inspect vise for misalignment, binding or cracked/damaged parts, or any other condition that may
affect safe operation. Repair or replace a damaged vise.
•
After use, wipe external surfaces of the vise with a clean rag. Apply a light coat of machine oil to exposed metal
areas.
•
The leadscrew is permanently lubricated and enclosed and should not require attention. Lubricate other moving
parts of the vise with machine oil.
•
Jaw insert replacement: Use a 5mm hex key to remove two screws on the jaw insert. Securely tighten the new
jaw insert to the vise using the same screws. NOTE: When replacing jaw inserts, replace both as a set.
