Baileigh Industrial BR-22, Руководство оператора

Страница: 15 / 20

13
13
LUBRICATION AND MAINTENANCE

Check daily for any unsafe conditions and fix
immediately.

Check that all nuts, bolts, and screws are properly
tightened.

Lubricate threaded components and sliding devices.

Apply rust inhibitive lubricant to all non-painted surfaces.

All exposed iron surfaces should be coated with light oil
to prevent rusting. Use a multi-purpose or bearing
grease for lubrication.

The adjusting block should be greased.

Grease the driving shaft fittings (G) monthly.
Note : Proper maintenance can increase the life expectancy of your machine.
TROUBLESHOOTING CHART
Symptom Possible Cause(s) Corrective Action
Dies cut through
metal Dies are too close
together 1. Adjust die position using adjusting
handle
Dies do not make
the form correctly
1. Dies are improperly
adjusted
2. Thumb screw loose
3. Workpiece material too
thick 1. Adjust die position using adjusting nut
2. Tighten thumb screw
3. Do not exceed machine capacity of
.030” (.76mm) mild steel or equivalent,
See Equivalency Chart
Crank arm difficult to
turn
1. Adjusting block loose or
not in proper position
2. Improper lubrication
1. Adjust set screws and secure by
tightening lock nuts. Loosen knob and
adjust position of adjusting block by
turning adjusting bolt. Retighten knob.
2. Lubricate properly, See Lubrication.
G