6
Warni and understand the entire owner’s manual before attempting assembly or operation.
1. Read and understand the entire owner's manual before attempting assembly or operation.
2. Read and understand the warnings posted on the machine and in this manual. Failure to comply with
all of these warnings may cause serious injury.
3. Replace warning labels if they become obscured or removed.
4. Do not use this grinder for other than its intended use. If used for other purposes, Baileigh Industrial
disclaims any real or implied warranty and holds itself harmless from any injury that may result from
that use.
5.
Always use the grinder’s eye shields. In addition, wear ANSI Z87.1 approved safety glasses, or a face
shield. (
Everyday eyeglasses only have impact resistant lenses; they are NOT safety glasses.)
6.
Before operating grinder, remove tie, rings, watches and other jewelry, and roll sleeves up past elbows.
Do not wear loose-fitting clothing. Confine long hair.
7.
Wear protective clothing such as apron or safety shoes, where the grinding activity presents a hazard
to the operator.
8. Wear ear protectors (plugs or muffs) if the particular work requires it.
9. Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.
10. Make certain the switch is in the OFF position before connecting the machine to the power supply.
11. Make certain the machine is properly grounded.
12. Make all machine adjustments or maintenance with the machine unplugged from the power source.
13. Remove adjusting keys and wrenches. Form a habit of checking to see that keys and adjusting
wrenches are removed from the grinder before turning it on.
14. Keep safety guards in place at all times when the machine is in use. If removed for maintenance
purposes, use extreme caution and replace the guards immediately after completion of maintenance.
15. Check damaged parts. Before further use of the machine, a guard or other part that is damaged should
be carefully checked to determine that it will operate properly and perform its intended function. Check
for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other
conditions that may affect its operation. A guard or other part that is damaged should be properly
repaired or replaced.
16. Provide for adequate space surrounding work area and non-glare, overhead lighting.
17. Keep the floor around the machine clean and free of scrap material, oil and grease.
18. Keep visitors a safe distance from the work area.
Keep children away
.
19. Make your workshop child proof with padlocks, master switches or by removing starter keys.
20. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are
careless acts that can result in serious injury.
21. Maintain a balanced stance at all times so that you do not fall into the tool or other moving parts. Do
not overreach or use excessive force to perform any machine operation.
22. Disconnect grinder before servicing and when changing abrasive wheels.
23. Use recommended accessories. The use of improper accessories may cause risk of injury to persons.
24. Turn off the machine before cleaning. Use a brush or compressed air to remove chips or debris — do
not use your hands.
Содержание BBG-8
Страница 21: ...21 11 1 1 BBG 8 Bench Grinder Exploded View...
