Baileigh Industrial BB-9616M, Руководство оператора

Страница: 10 / 40

8
8
TECHNICAL SPECIFICATIONS
Bend Length
96” (2438mm)
Bend Material Thickness
Bending Leaf Extension Removed 16ga. (1.51mm) mild steel*
20ga. (0.91mm) stainless steel**
Bend Material Thickness
Bending Leaf Extension Installed 18ga. (1.21mm) mild steel*
21ga. (0.83mm) stainless steel**
Bend Angle 0
– 180 degrees
Box Depth Unlimited
Clamping Force 6 ton (5443kg)
Minimum Depth Under Clamping Bar
2” (51mm)
Power 220V (±5%), 1ph, 60hz, 15A
Duty Cycle 30%
Thermal Cut-Out 158°F (70°C)
Shipping Dimensions (L x W x H)
106” x 44” x 15” (2700 x 1120 x 380mm)
Shipping Weight 1276 lbs. (462 kg)
Based on a material tensile strength of *64000 PSI
– mild steel
**100000 PSI
– stainless steel
‡Maximum capacity listed is obtained with the bending leaf extension removed.
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.