Baileigh Industrial B8870, Руководство оператора

Страница: 18 / 32

16
16
Selecting Lower Wheels
Choose a lower wheel that will produce the contour you desire.
Flat lower wheels are good for adding gentle curves to large metal panels; these wheels have
wide flat surfaces profiles
Domed lower wheels create tighter curves. The flat areas range from 1/8” to 3/4" (3.175 to
19.05mm). The wider the flat area, the wider the track produced on the workpiece.
Roll a workpiece between a grooved lower wheel and a ridged upper wheel to emboss metal.
The step roller can be used with the flat upper wheel to add a small crease in a metal panel.