recording using infrared signal. For cameras without shutter release port, infrared
control can be a good option. And this makes Pluto Trigger support many more
cameras.
8.2.1.
IR
R
EMOTE
M
ODE
Default: Off
Use this setting to make Pluto Trigger emit different type of infrared signal.
Available options are: Off, Single, 2S and Video. Certain mode may not work,
depending on the setting “Camera Brand” below.
8.2.2.
C
AMERA
B
RAND
Default: Off
Change this setting to match you camera brand. Infrared remote of different
brand emit different signal.
You can set this setting to “All brands”, then Pluto Trigger will emit infrared signal of
all brands. Thus, you can use Pluto Trigger as an infrared remote for all supported
brands.
8.4.
B
URST
Change this setting if you want to take multiple pictures when trigger is fired. This
setting only applies in “Pluto Sensor Modes”.
8.4.1.
B
URST
C
OUNT
Default: 0
Set this value to the number of pictures you want to take when Pluto Trigger is fired.
This setting only applies in “Pluto Sensor Modes”.
8.4.2.
B
URST
I
NTERVAL
Default: 0.5”
Change this setting to set the time interval, at which multiple pictures are taken.