Baicells Neutrino430, Руководство по установке

Страница: 10 / 28

10
Table 2-2: LEDs
LED Color Status Description
PWR Green
Steady on Power is on
OFF No power supply
RUN Green
Steady on Power is on
Fast flash: 0.125s on, 0.125s off Data is transmitting
Slow flash: 1s on, 1s off The cell has been activated
ACT Green OFF Reserved
ALM Red
Steady on Reserved
Fast flash: 0.125s on, 0.125s off S1 alarm
Slow flash: 1s on, 1s off Other alarms
Table 2-3: Interfaces
Interface Name Description
PWR 12V DC power supply interface
GPS Port for optional external GPS antenna, N-female connector
WAN/PoE+ Gigabit Ethernet and PoE+ interface, used for debug and power supply.
OPT Optical fiber interface, connect to external transmission network, used
for data backhaul.
2.3 Location & Environment
The Neutrino-430 can be installed on a ceiling or a wall. For the best signal coverage, place the
eNB in an unobstructed location. In addition to network planning, when determining where to
place the eNB, you need to consider the best location for signal coverage. Avoid locating the
eNB in areas where there may be extreme temperatures, harmful gases, unstable voltages,
volatile vibrations, loud noises, flames, explosives, or electromagnetic interference (e.g., large
radar stations, transformer substations). Avoid areas prone to impounded water, soaking,
leakage, or condensation. Environmental specifications are shown in Table 2-4
.
Table 2-4: Environment Specifications
Item Description
Operating Temperature -5°C to 40°C
Storage Temperature -10°C to 50°C
Humidity 5% to 95%
Atmospheric Pressure 70 kPa to 106 kPa