Baicells EG7010A-M11, Руководство пользователя

Страница: 21 / 26

15
2. In the connection Method area, set the connection method
3. There are two methods to connect the LTE network, it is needed to choose a method
between Auto and Manual, if you want to auto connect to the LET network you should
choose the Auto, otherwise you should choose Manual.
4.
Click “
SAVE & APPLY
”.
4.3.3 Set Scan Mode
To set the LTE network scan mode, perform the following steps:
1.
Choose “
LTE>Scan Method
”, enter the setting scan method page, as shown in
Figure
4-4 .
Figure 4-4 Set Scan Mode
2. In the Scan Method area, set the scan mode
3. You can choose full Ban d, Frequency Lock, or PCI Lock .
4.3.4 Lock Frequency (Earfcn)
To clock the frequency, perform the following steps:
1.
Choose “
LTE>Scan Method
”.
2. In the LTE Scan Method area, click Frequency Lock to lock the frequency.
3. Click ADD LIST , choose a band and frequency, and then click Add to add the band
and frequency to the list, as shown in
Figure 4-5
.