Baicells Atom OD040615, Руководство пользователя

Страница: 32 / 42

32
• Frequency Lock / Dedicated EARFCN – You can specify up to 9 frequencies or E-UTRA Absolute
Radio Frequency Channel Numbers (EARFCNs) the CPE will scan during its routine signal scan. The
frequency/EARFCN information will come from the service provider.
• Cell Lock / PCI Lock - A combination of Physical Cell Identifier (PCI) + EARFCN or frequency. The
CPE will scan only the list of eNBs with the PCI and EARFCN combination, which accelerates
network access time.
•
PCI-only Lock – You can lock the CPE to a designated PCI or PCI range.
If you wish to leave the scan mode as Full Band , you do not need to make any configuration changes for
the mode The procedures for configuring the other three modes are described for CAT4 and for CAT6/7/15
in the sections that follow.
7.5.2 CAT4
Following are the procedures for configuring Frequency Lock, Cell Lock , and PCI Lock on a CAT4 CPE.
• Frequency Lock (Figure 35)
1. For Scan Mode , select Frequency Lock from the pull-down menu.
2. Click on ADD LIST to open the Frequency Lock Setting pane.
3. Select the Band number, and enter the Earfcn .
4. Click on ADD . Then click SAVE & APPLY .
Figure 35: Frequency Lock (CAT4)