Baicells Atom ID0406-6.5, Руководство пользователя, Страница: 8 / 39

3
On the top of the unit is a card slot for the Baicells Universal Subscriber Identity Module (USIM) card
provided through the operator or distributor. A USIM contains equipment and subscriber identification
numbers (IMEI and IMSI) and uniquely identifies your CPE so it can access the provider's network.
The LED indicators on the front provide operational status information (Figure 3). Refer to Table 2 for a
description of the LEDs. Various connection interfaces are on the back of the unit, as well as a small LED
for the Local Area Network (LAN) connection. For a description of the interfaces, refer to Table 3.
Figure 3: LEDs & Interfaces
Table 2: LED Descriptions
LEDs vary by model; not all models will have all of the LEDs listed.
LED Description Status Meaning
Power Power indicator
OFF No power supply
Steady On Power is on
Wi-Fi or WLAN
Wireless LAN (Wi-Fi)
status indicator
Steady On Wi-Fi function is enabled
Blinking
Data is being transmitted or received through using
Wi-Fi
OFF Wi-Fi function is disabled
SYS or LTE
Network LTE network status
indicator OFF No LTE internet connection
Steady On LTE network connection established
LTE Signal
Strength
1, 2, 3, or 4 bars
show wireless
connection status
and signal strength.
The more bars, the
stronger the signal.
All OFF Signal is too weak to connect to the LTE network
Steady On
The unit is connected to the LTE network. Bars will
light steadily according to signal strength.
Blinking
The unit is scanning the LTE network.
The unit is authenticating.
Software upgrade or restore to factory settings
Tel
(Atom ID06-6.5 only)
Voice telephone
interface indicator
Off VoIP not registered with the voice server
Steady on VoIP registered with a voice server