Baicells Atom ID0406-6.5, Руководство пользователя, Страница: 6 / 39

1
1 Introduction
The Baicells Atom ID0406-6.5 indoor Customer Premise Equipment (CPE), aka User Equipment (UE), is part
of the Baicells broadband wireless access system that integrates with Long-Term Evolution (LTE) backhaul
networks to provide subscribers with Internet access. The CPE communicates through a wireless
connection to the operator’s eNodeBs (eNBs) at cell sites located in the region. The eNBs communicate
with the backhaul network (Figure 1).
Figure 1: LTE Network Architecture
The Indoor Unit (INU) CPE comes preloaded with a Graphical User Interface (GUI) application to configure
the device. The GUI screens for CAT4 and CAT6/7 look different, though both contain many of the same
types of settings. This document covers both GUIs and points out where there are differences.
2 Features
Some of the key features and attributes of the Atom indoor CPE are listed below. Exact specifications vary
by model; please refer to the datasheets found at Baicells.com > Resources >
Documents .
•
Standard LTE TDD bands 40, 41, 42, 43, and 48
• Complies with 3GPP standards for Release 9 CAT4 and Release 10 CAT6/7
•
IEEE 802.11b/g/n Wi-Fi 2.4 GHz supported
• 2.5 GHz or 3.5 GHz models
• Small footprint
•
Local and remote GUI with flexible feature configuration options
• The CAT6/7 Atom ID06-6.5 provides Voice Over IP (VoIP) communications to support fax and
Point-of-Sale (POS) equipment connectivity using an RJ-11 interface