20
BMMTRS1
ENGLISH
5.2 Fuse replacement
1. Set rotary switch to the OFF position.
2. Disconnect test leads and/or any connectors from the terminals.
8VHDVFUHZGULYHUWRXQORFNWKHIRXUVFUHZVRQWKHUHDUFRYHU
4. Take out the rear cover from the meter.
5. Remove the fuse by gently prying one end loose, then sliding the fuse out of its bracket.
,QVWDOOWKHUHSODFHPHQWIXVHVRQO\ZLWKVSHFL¿HGUDWLQJV)$9[DQG
F 10A/1000V Ø10.3x38
7. Rejoin the rear cover and tighten the screws.
5.3 Battery replacement
1. Set rotary switch to the OFF position.
2. Disconnect test leads and/or any connectors from the terminals.
8VHDVFUHZGULYHUWRXQORFNWKHWZRVFUHZVRQWKHEDWWHU\FRYHU
4. Take out the battery cover from the meter.
5. Remove the used battery.
6. Replace with one new 9V battery (6F22).
7. Rejoin the battery cover and tighten the screws.
6. ACCESSORIES
Delivered with the multimeter:
To avoid false readings, which could lead to possible electric shock or personal
injury, replace the battery as soon as the battery indicator (
) appears.
Before replacing the battery, disconnect test leads and/or any connectors from
any circuit under test, turn the meter off and remove test leads from the input
terminals.
8VHUVPDQXDO
One piece
Test leads with clamp 10A
One piece
Test leads with needle 10A
One piece
"K" type Thermocouple leads
One piece
86%FDEOH
One piece
3&/LQNVRIWZDUHXVHUPDQXDO86%VWLFN
One piece
Before replacing the fuse, disconnect test leads and/or any connectors from any circuit
XQGHUWHVW7RSUHYHQWGDPDJHRULQMXU\UHSODFHWKHIXVHRQO\ZLWKVSHFL¿HGUDWLQJV