background image

GHES450

BH1OZ2000

 2 

Rev. 012219

 

•  Read, study, understand, & follow all instructions before using.

 

•  Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.

 

• 

Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking 

hydraulic fluid, or unstable due to loose or missing components. Make corrections before using.

 

•  Do not use jack beyond its rated capacity. Do not shock load.

 

•  This is a lifting and lowering device only. Immediately after lifting, support the vehicle with two support 

stands capable of sustaining the load before working on the vehicle.

 

•  Use only on a hard level surface free from obstructions so the jack is free to reposition itself during lifting and 

lowering operations.

 

• 

Lift only on areas of the vehicle as specified by the vehicle manufacturer.

 

•  Chock the unlifted wheels of the vehicle.

 

•  No person should remain in a vehicle that is being lifted.

 

•  Center load on saddle. Be sure setup is stable before working on vehicle.

 

 
 

 

SAVE THESE INSTRUCTIONS

   

  

DEATH OR INJURY

 

FROM INCORRECT USE

 
 

 

 

USE TWO

 SUPPORT STANDS

 
   

   FLAT HARD         FREE

 

TO ROLL

 

DURING

 

LEVEL

 

GROUND

 

LIFTING AND LOWERING

REFER TO VEHICLE MANUFACTURER

S

MANUAL FOR INSTRUCTIONS

Содержание BH1OZ2000











Отзывы: