Bahco BE210, Руководство пользователя

Страница: 34 / 138

Tube length
1 M
Field of View (FOV) 54 º
1.5 cm - 5 cm
Light Source 4 LEDs
Probe Working Temperature
-20 to 60 °C
Ingress Protection
IP57
Tube Diameter
O.D 5.8mm semi-rigid
Display Unit
Power
DC5V
Display 3.5” TFT LCD Monitor 320 X 240 Pixels
Interface
Mini USB 1.1/ AV out
Battery (not user serviceable) Rechargeable Li-Polymer Battery (3.7V)
Power adapter 100 - 240V AC in / 5.0V DC out.
Video Out Format
NTSC & PAL
Recording medium SD card
Compression Format
MPEG4
Still Image Storage Format JPEG (640 X 480)
Video Recording Format AVI (640 X 480)
Working & Storage/Battery charging
temperature range
-20 °C to 60 °C /0 to 40 °C
Functions
Snapshot, Video recording, Picture & video
review on LCD screen, TV Out, transfer of
picture & video from SD card to computer
Digital Zoom, Reflecting
Image Sensor
CMOS Image Sensor
Resolution (Dynamic / Static)
320 (H) X 240 (V) / 640 (H) X 480 (V)
Size Tip (Insertion Tube ) Diameter 5.5 mm
Technical data
Depth of Field (DOF)
Insertion Tube & Light Source
6.
English English
32 33
IMG00001.JPG
IMG00009. AV I
100DSCI M DCI M
Tr ansferring Photos and Vi deos to a compute r
Troubleshooting
In order to use this function, the computer must be running MS WindowsTM 2000 or
younger version.
Turn the Video Scope on. Connect the USB cable to the scope unit and the computer.
Look for the drive with the SD card files,
this should look similar to the following figure:
Problem: No image on the display after turning the power o n
Solution: The battery is exhausted. Connect the scope unit to the power adapter supplied
and recharge the batteries.
The Video scope can be used when connected to ac power.
Problem: Only words appear on the LCD monitor , and no image is shown, after turning
the power on.
Solution: Check that the insertion tube is correctly connected to the display unit.
Problem: It is not possible to take pictures or record videos:
Solution: The SD card is either not inserted, is wrongly inserted, full or faulty. Refer to
Preparation for use (section2) for guidance on how to insert the SD card.
Check the SD card capacity or if it is faulty (by using it in other devices).
Problem: All functions freeze or fail.
Solution: Insert an insulated needle into the hole on the back of the main unit.
The system will restart automatically.
The files can then be transferred and viewed on the computer.
If the computer is running the correct operating system
(MS Windows 2000 or a younger version of Windows)
no special software is required to display JPG
and ASF files by using Windows MediaPlayer.
5. Tr oubleshootin g