The coil
on the reel
must turn
clockwise.
The wire must
be smooth
and untwisted.
11
12
7
8
9
10
Use only the following BAHCO binding materials:
- BCL4001
paper-coated wire
- BCL4002
plastic-coated wire
Place a new coil on the reel.
Max. wire ø 0.43 mm.
Replace the cover
of the reel.
Remove the strap on the coil
with tweezers or scissors.
Insert one end of the wire -
which must be smooth - into the
machine until there is resistance.
Turn on the power for a test
run. Make one tie and remove
it with tweezers.
Close the cover
of the coil holder.
4
5
6
Use tweezers
to remove
the remaining
tying wire.
Insert the
guiding plate.
Replace the
front cover.
Never pull out the wire at the reel end.
Always pull it out at the hook in the direction of feed.
