BAGNODESIGN BAGNOSPA BDD-SPA-GEN3-1-A, Руководство по установке

Страница: 8 / 16

GEN3-1
!
To avoid damage to the equipment, do not connect strong electric current
directly to the components
Electrical requirements:
Caution :
!
To facilitate maintenance, keep the steam engine clean. If the information
provided is limited, do not operate on the pipeline and electric equipment arbitrarily as shown
in the figure for proportion.
Attention :
Electricity supply circuitry:
1. Test the voltage of electricity supply and make sure steam engine with suitable electric
voltage should be used..
2. Insulated copper wire should be used with an anti-heat temperature of 90℃ and a specified
voltage of 500V. Refer to national or local electricity consumption code for the
specifications. Refer to the ammeter for the ampere.
3. Choose steam engine with suitable item number, and plug the ground wire into the ground
terminal.
4. Install an independent circuit breaker between the power supply and the steam engine so as to
provide an electricity supply with overflow protection and electricity leakage protection.
!
All the connection must be in accordance with national and local electricity
consumption code and be installed by professional electricians.
Attention :
Ampere Meter
GEN3-1 -3KW
Type
Applicable
space of the
room (m
3
)
Electricity supply
Specifications for
power wire
12# or 2.0mm
2
Max. Electric
current (A)
13.7A
220-240V (1PH/2PH) 33
GEN3-1 - 4.5 KW
12# or 4.0mm
2
20.5A
220-240V (1PH/2PH)
4 7
27.3A
16.7A
9A
220-240V (1PH/2PH)
GEN3-1 - 6 KW
GEN3-1 - 9 KW
5 8
10 12
41 A
2 5 A
13.7 A
2 08 V ( 3 PH)
380-415V ( 3 PH)
220-240V ( 1 PH /2PH )
208V ( 3PH )
380-415V ( 3 PH)
1 0 # or 6 .0mm
2
12# or 4.0mm
2
12# or 2.0mm
2
8 # or 8 .0mm
2
12# or 4.0mm
2
12# or 2.0mm
2
The data provided above are for 220-240V(1PH/2PH), 208V(3PH) and 380-415V(3PH).
Within the eyeshot of the steam engine, install an independent circuit breaker so as to p rovide an
electricity supply with overflow protection and electricity leakage protection.