IMPORTANT SAFETY / LEGAL
INFORMATION
> Legal notice
> Important safety instructions
> Warning
> Installation & connection
> Cleaning & maintenance
> Disposal & recycling information
> FCC statement
> IC statement
> Declaration of conformity
Legal notice
© Zound Industries International AB. All Rights Reserved. Zound Industries
International AB is hereinafter referred to as “Zound Industries”.
URBANEARS™ and the speaker product, packaging, logo and wordmark
are intellectual properties of Zound Industries and may not be used without
permission.
Wi-Fi®, the Wi-Fi logo and the Wi-Fi CERTIFIED™ logo is a certification mark
of Wi-Fi Alliance® .
The Bluetooth® word mark and logos are registered trademarks owned
by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries is
under license.
Android™, Google Play™, and Chromecast™ are trademarks of Google Inc.
Apple, AirPlay, iPod, iPhone, iPad, and the Apple and AirPlay logos are
trademarks of Apple Inc. registered in the U.S. and other countries.
Spotify® and Spotify Connect logos™ are trademarks of the Spotify Group,
registered in the U.S. and other countries.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an
electronic accessory has been designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod, iPhone, or iPad may affect wireless
performance.
All other trademarks are the property of their respective owners and may not
be used without permission.
For more legal information related to this product and to its use in your specific
region, and for more detailed information about Zound Industries and partner
& license information, please visit the website:
http://www.urbanears.com
Important safety
instructions
01. Read these instructions
02. Keep these instructions
03. Heed all warnings
04. Follow all instructions
05. Do not use this apparatus near water
06. Clean only with dry cloth
07. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
08. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
09. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Warning
•
Keep the product and its accessories away from young children. This is
not a toy.
•
Do not install the product in an area that impedes access to the power
plug. Disconnecting the power plug is the only way to completely remove
power to the product and the plug must be readily accessible at all times.
•
To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture. The apparatus shall not be exposed to dripping or
splashing and that objects filled with liquids, such as vases, shall not be
placed on apparatus.
•
Do not drop the product.
•
Do not cover the product to avoid risk of overheating.
•
Do not listen too close to the product.
•
Do not listen for an extended period of time at a high sound pressure
level.
•
Do not insert body parts or objects into the bass port for risk of injury.
•
The mains plug is used as disconnect device, the disconnect device shall
remain readily operable.
•
Please refer the information on exterior bottom enclosure for electrical
and safety information before installing or operating the apparatus.
This equipment is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection to
electrical earth.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of non-insulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Warning: To reduce the risk of electric shock, do not remove cover (or back)
as there are no user-serviceable parts inside. Refer servicing to qualified
personnel.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions in
the literature accompanying the appliance.
For complete safety information, visit the website: http://www.urbanears.com
Installation &
connection
•
Connect the product according to the instructions in the manual.
•
Connect the product only to the correct mains voltage as shown on the
equipment.
•
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit the
apparatus.
•
Use only power cables of the type specified in the operating instructions
or as marked on the product.
•
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding plug has two blades and a third grounding prong.
•
The wide blade or the third prongs are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
•
Unplug the product during lightning storms or when unused for long
periods of time.
•
Do not install this equipment in a confined or building-in space, and
remain a well ventilation conditions at open site. The ventilation should
not be impeded by covering the ventilation openings with items such as
newspaper, table-cloths, curtains etc.
•
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
•
The use of apparatus in tropical or moderate climates.
Cleaning &
maintenance
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Clean only with dry cloth.
For more detailed cleaning and maintenance instructions, visit the website:
http://www.urbanears.com
Disposal &
recycling
information
The crossed-out wheeled bin symbol on your product (and any included
batteries and other electronic accessories) indicates that they should not be
disposed of as normal household rubbish. Do not dispose of your product,
batteries and electronic accessories as unsorted municipal waste. Your
product, batteries and electronic accessories should be handed over to a
certified collection point for recycling or proper disposal at the end of their life.
For more information related to disposal and recycling, visit the website:
http://www.urbanears.com
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To comply with FCC’s and Industry Canada’s RF radiation exposure limits for
general population/uncontrolled exposure, this device must be installed to
provide a separation distance of at least 20cm from all persons.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
WARNING: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz
and 5.65 to 5.85 GHz bands. These radar stations can cause interference
with and/or damage this device. No configuration controls are provided for
this wireless equipment allowing any change in the frequency of operations
outside the FCC grant of authorization for US operation according to Part
15.407 of the FCC rules.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
IC statement
This device complies with RSS247 of Industry Canada.
Cet appareil se conforme à RSS247 de Canada d’Industrie.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement: The product complies with the Canada
portable RF exposure limit set forth for an uncontrolled environment and are
safe for intended operation as described in this manual.
The further RF exposure reduction can be achieved if the product can be kept
as far as possible from the user body or set the device to lower output power if
such function is available.
Déclaration d’exposition aux radiations : Le produit est conforme aux limites
d’exposition pour les appareils portables RF pour les Etats-Unis et le Canada
établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel.
La réduction aux expositions RF peut être augmentée si l’appareil peut être
conservé aussi loin que possible du corps de l’utilisateur ou que le dispositif
est réglé sur la puissance de sortie la plus faible si une telle fonction est
disponible.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
CAN ICES-3 (B)/NMB-3(B)
To prevent radio interference to the licensed service, this device is intended to
be operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Pour empêcher que cet appareil cause du brouillage au service faisant
l’objet d’une licence, il doit être utilisé a l’intérieur et devrait être placé loin des
fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son
antenne d’émission) est installé à l’extérieur, il doit faire l’objet d’une licence.
Notice for 5 GHz devices
Caution: (i) The device for operation in the band 5150 - 5250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems; (ii) the maximum antenna gain permitted for devices
in the bands 5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the
e.i.r.p. limit: and (iii) the maximum antenna gain permitted for devices in the
band 5725 - 5825 MHz shall comply with the e.i.r.p. limits specified for point-
to-point and non point-to-point operation as appropriate. (iv) Users should
also be advised that high-power radars are allocated as primary users (i.e.
priority users) of the bands 5250 - 5350 MHz and 5650 - 5850 MHz and that
these radars could cause interference and/or damage to LE-LAN devices.
Exposure of humans to RF fields (RSS-102)
The computers employ low gain integral antennas that do not emit RF field
in excess of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada’s Web site at http://www.hc-sc.gc.ca/
The radiated energy from the antennas connected to the wireless adapters
conforms to the IC limit of the RF exposure requirement regarding IC
RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended
operating positions accepted by the FCC/ RSS with the device transmitting at
its highest certified power level in all tested frequency band without distance
attaching away from the body. Non-compliance with the above restrictions
may result in violation of FCC RF exposure guidelines.
Conformité des appareils de radiocommunication aux limites d’exposition
humaine aux radiofréquences (CNR-102)
L’ordinateur utilise des antennes intégrales à faible gain qui n’émettent pas
un champ électromagnétique supérieur aux normes imposées par Santé
Canada pour la population. Consultez le Code de sécurité 6 sur le site
Internet de Santé Canada à l’adresse suivante : http://www.hc-sc.gc.ca/
L’énergie émise par les antennes reliées aux cartes sans fil respecte la limite
d’exposition aux radiofréquences telle que définie par Industrie Canada dans
la clause 4.1 du document CNR-102, version 5. Tests DAS sont effectués
en utilisant les positions recommandées par la FCC/CNR avec le téléphone
émet à la puissance certifiée maximale dans toutes les bandes de fréquences
testées sans distance attacher loin du corps. Non-respect des restrictions ci-
dessus peut entraîner une violation des directives de la FCC/CNR.
Declaration of
conformity
Hereby, Zound Industries International AB, declares that this product is in
compliance with the essential requirements and other relevant provisions of
Directive R&TTE 1999/5/EC and the RoHS directive 2011/65/EU.
For the declaration of conformity, visit this website: http://www.urbanears.
com
Zound Industries International AB, Centralplan 15 111 20 Stockholm Sweden
Website: http://www.urbanears.com
The user is recommended to visit the Website regularly for up-to-date
information.
