background image

    USER MANUAL – 

M625/M325 DRIVE SYSTEM

5

4 ENVIRONMENTAL TIPS AND 

HANDLING REQUIREMENTS

General cleaning and maintenance: take 
environmental aspects into consideration when 
maintaining and cleaning the pedelec. The prod-
uct and detergents should be biodegradable. 
Use these products at any time just, please make 
sure that no cleaning agent does not get into the 
sewage. 

The battery

Battery used in the pedelec is subject to the 
Battery Ordinance and may only be disposed of 
in accordance with the applicable regulations.

Oil

tery

Bat

5 GUARANTY

All warranty and guarantee conditions are 
subject to applicable laws and regulations from 

your brand.

The condition for warranty and guarantee 
claims is that the instructions for the system are 
followed carefully.

Liability for material defects does not include 
normal aging or wear and tear.

Warranty Period:

Under compliance with local law and reasonable 
use, the warranty period ends 12 months after 
the date of selling. 

Warranty and warranty exclusions:

 

Modification, manipulation or improper 
repair of the product.

 

Improper use of the product.

 

Damage caused by inconvenience, misuse, 
negligence, incorrect installation, improper 
repair, incorrect maintenance or improper 
use. 

 

Modifications of the surface structure.

 

Damage caused by improper transport or 
storage caused by the buyer.  

 

Damage caused by force majeure.

 

Removal or alterations of serial number, 
plates or product markings.   

GU
ARANT

Y

Содержание M625






































Отзывы: