4
BF-DM-C-FM G312-D-EN December 2022
6.3 DRIVE UNIT INSTALLATION
6.3.1 List of Tools to be used
Use of the Tools
Tools
To fasten BC3/8 cap lock nuts
Open-end wrench
To fasten the screws on disk brake
Internal hex wrench
6.3.2 Motor Installation
1. First fix the disc brake on to non-cable side
of the motor and insert the stop pin on to
the shaft.
2. Insert the motor into the frame.
3. Mount one 2mm washer on both sides of
the frame.
4. Fasten clockwise BC3/8 cap lock nut with
open-end wrench at both ends of the mo-
tor. Torque requirement: 30-36N.m.
