background image

CONSUMER MANUAL

 

MAX DRIVE SYSTEM

   

CONSUMER MANUAL

 

MAX DRIVE SYSTEM

DISPLAY (DP CO7.UART)

16

17

1.5.7 

Automatic Off Time

When the speed field displays OFF, press 

 / 

 to 

choose a figure between 1 and 9. The gures indicate 
the minutes that it takes to automatically shut down 
the display.

After this setting, briefly press 

 (< 0.3 seconds) to 

enter the setting interface of maintenance warning.

1.5.8 

 Maintenance Warning  
(can be deactivated) 

When the speed field displays nnA, press 

 / 

 to 

choose either 0 or 1. 0 disables the function while 1 
enables it.

 After this setting, briefly press 

 (< 0.3 seconds) to 

enter the setting interface of password input.

Maintenance Warning Setting

The display will prompt maintenance necessity based 
on such information as the accumulated riding dis

-

tance and the battery charge cycles. 

•  When the accumulated total riding distance 

exceeds 5,000 km (can be customized by the 
manufacturer), the display will show the symbol 

. When the display is started up, the 

sign for accumulated riding distance will flash 
for 4 seconds, indicating that maintenance is 
necessary.

•  When the number of battery charge cycles ex

-

ceeds 100 (can be customized by the manufactu

-

rer), the display will the symbol 

When 

the display is started up, the sign for battery will 

flash for 4 seconds, indicating that maintenance 
is necessary.

• 

The maintenance alert function can be disabled: 

settings 

 maintenance alert (MA) 

 main

-

tenance alert (MA) 

 0. (Maintenance alert 

can also be set via a computer. This requires a 

USB connection. See also the parameter setting 

instructions).

 

1.6   Error Code Definitions

The MAX-C966 display can show e-bike faults. When a fault is detected, the icon   will be displayed. In the speed 

field one of the following error codes will be displayed:

Error Code Error Description

Error-shooting Method

“03”

Brake enabled

Check whether a brake cable is stuck

“04”

T

he throttle has not returned home

Check if throttle has returned home

“05”

T

hrottle fault

Check the throttle

“06”

Low voltage protection

Check the battery voltage

“07”

O

vervoltage protection

Check the battery voltage

“08”

Motor hall signal cable fault

Check the motor module

“11”

Controller temperature sensor failure

Check the controller

“12”

Current sensor failure

Check the controller

“13”

Battery temperature fault

Check the battery

“21”

Speed sensor fault

Check installation position of speed sensor

“22”

BMS communication fault

Replace the battery

“30”

Communication fault

Check the controller connection

Error display

“10”    

Stop the bicycle until the error code “10”
disappears from the screen

Note: Error Code 10 will probably appear on the dispaly 
when the e-bike is climbling for a long time. This 
indicates that the motor temperature has reached the 
protection value, in which case the user needs to stop 
the e-bike for a rest. If the user continues to run the 
e-bike, the motor will automatically cut off the power.

The motor temperature has reached 
the threshold

Содержание DP C07.UART





















Отзывы: