BAFANG DP C01.CAN BUS Скачать руководство пользователя страница 10

Страница: 10 / 12

BF-UM-C-DP C01-EN Novmber 2019

7.8 ERROR CODE DEFINITION

The display can show the errors of a pedelec. If an error is detected, one of the following error codes will be
displayed.

Note:

Please read the description of the error code carefully. If you see the error code, restart the system first. If the

problem is not resolved, please contact your dealer.

Error

Declaration

Troubleshooting

The throttle is not back in its correct
position.

Check the throttle can adjust back into its
correct position, if the situation does not
improve, please change to a new throttle.(only
with this function)

The throttle has fault.

1. Check the connector of throttle whether
they are correctly connected.

2. Disconnect the throttle, If the problem still
occurs, please contact your retailer.

(only with this function)

Overvoltage protection

1. Remove the battery.

2. Re-Insert the battery.

3. If the problem persists, please contact your
retailer.

Error with the hall sensor signal
inside the motor

Please contact your retailer.

Error with the Engine phase’s

Please contact your retailer.

The temperature inside the engine
has reached its maximum protection
value

1. Turn off the system and allow the Pedelec
to cool down.

2. If the problem persists, please contact your
retailer.

The temperature sensor inside the
motor has an error

Please contact your retailer.

Error with the current sensor in the
controller

Please contact your retailer.

Error with the temperature sensor
inside of the battery

Please contact your retailer.

Содержание DP C01.CAN BUS













Результаты поиска

Содержание DP C01.CAN BUS

Отзывы:

Похожие инструкции для DP C01.CAN BUS

Бренды по названию

Популярные бренды

BAFANG DP C01.CAN BUS, Руководство пользователя

Результаты поиска

Содержание DP C01.CAN BUS

Отзывы:

Похожие инструкции для DP C01.CAN BUS

Бренды по названию

Популярные бренды