- WARNING -
!
For safe operation, do not attempt to use this equipment until you
have read and thoroughly understand all the information contained
within this manual. If you are unsure as to the safe operation of this
equipment, contact Baer Amplification before using this product.
‣
Do not expose speaker cabinets to water, rain, moisture, or extreme humidity.
‣
Do not place liquids on top of the speaker cabinet. Should your drivers become
wet for any reason, allow the drivers to fully air dry before any further use.
‣
Never use amplification equipment when lightning is present in your location.
‣
Do not use near sources of heat, areas of extreme ambient temperatures, or in
direct sunlight.
‣
Always make sure that the amplifier is connected to your speaker cabinet(s)
before powering on the unit.
‣
When using an all tube amplifier, insure that the correct impedance has first been
set on the amplifier for the speaker configuration you are using. Failure to do so
could result in severe damage to your amplifier!
‣
Do not use your speaker cabinet if it has been dropped, or damaged in any way. If
the cabinet is not acting normal for any reason, turn off your amplifier and refer the
cabinet to qualified service personnel.
‣
Never connect more than one amplifier at once to the same speaker cabinet.
Doing so will cause severe damage to your equipment!
‣
There are no user serviceable parts inside. Do not attempt to work on your
equipment yourself. Refer service to qualified personnel only.
‣
The use of Speakon connectors is highly recommended.
As a musician, your hearing is your most precious resource. Your amplification
system is capable of producing extremely high sound levels and should be used
only while wearing adequate hearing protection. Repeated exposure to the sound
levels typically present while perfoming live music, without the use of hearing
protection, can result in permanent hearing loss!
- WARNING -
!
3
