Operating Manual BaehrTec S1200
English – V100 – Status 09/2015
Page 37/48
Fig. 17 Fig. 18 Fig. 19
You can also clean Easy-Clean in the event that cream, fat, oil or the like gets into the
clamping mechanism.
To do so proceed as follows.
1.
Turn off the device at the main switch and disconnect it from the power
supply. Never clean the devicce while the handpiece motor is still running!
Risk of injury! In addition, the clamping mechanism will suffer damage!
2.
Moisten the clamping mechanism cleaner 2 with alcohol (Art-No. 11032) (
never
use re-lubricating disinfectant or other greasy substances, as Easy-Clean may
otherwise cease to function properly).
3.
Insert the clamping mechanism cleaner 2 into the opening of your handpiece
and turn it to the left and right.
4.
Remove the clamping mechanism cleaner 2.
5.
Now leave the handpiece to air for at least 3 minutes.
Your handpiece is now once again ready for operation.
If your handpiece still does not function correctly in spite of these cleaning measures, or if
you have any questions about the cleaning process, please get in touch with us.
For detailed video instructions on cleaning the Easy-Clean
grips to supplement this information sheet, please go to
www.fusspflege.com/easy-clean.
To access the website directly, please scan the QR code with
your smartphone and an appropriate app.
5.6
Instrument changing aid (insertion and removal aid for very small
instruments)
To accompany your Easy-Clean clamping mechanism, we have developed an instrument
changing aid to make it easier for you to change (remove and insert) very small instruments
(instrument diameter approx. 1.5 mm – approx. 5.0 mm).
It is essential that you read this section with the utmost care! It contains
important information on protecting yourself, others and the device from
damage! It must only be used by trained professionals.
Never change an instrument on a device that is still connected to the mains.
Turn off the device at the main switch beforehand and disconnect it from the
power supply.
Caution – risk of injury! Never try to change the instrument on the
handpiece while the handpiece motor is running. This can only be done
when the handpiece motor is switched off.
Only the appropriate tool should be used to change the instrument. Other
types and fields of application are carried out at your own risk, and may
conceal dangers. No form of misappropriation is permitted.
