BAE Audio 10DC, Инструкция по эксплуатации

Страница: 2 / 10

BAE 10DCF ©2017
1
BAE AUDIO – 10DCF
SAFETY
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS
For Service or Repair
BAE
7421 Laurel Canyon Blvd
Unit 14
North Hollywood, CA 91605
(818) 784-2046
baeaudio.com
Read instructions - All the safety and operating instructions
should be read before operating the unit. The term “unit” here-
forth includes the remote power supply.
Retain instructions - The safety and operating instructions should
be retained for future reference
Head Warnings - All warnings pertaining to the unit and power
supply should be adhered to.
Follow Instructions - All operating and use instructions should be
followed.
Water and Moisture - The unit should not be used near water
- for example, near a bathtub, washbowl, kitchen sink, in a wet
basement, or near a swimming pool, and the like.
Ventilation - The unit should be situated so that its location or
position does not interfere with normal ventilation.
Heat - The unit should be situated away from heat sources such
as power amplifiers and power conditioning filters.
Grounding - Precautions should be taken so that the safety
grounding means are not defeated and the protective earth
terminal/safety ground should be connected to a mains outlet
with a protective earth/safety ground connection.
Power Cord Protection - Power supply cords, AC and 5 pin DC,
should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular
attention to cords at plugs and the point where they exit from the
power supply and unit.
Nonuse Period - The power cord of the appliance should be
unplugged from the AC outlet when left unused for a long period
of time.
Object and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through the
openings such as the ventilation slots.
Servicing - The user should not attempt to service or modify the
unit unless qualified to do so and under the guidance of BAE
service personnel.