Badland ZXR9000 Скачать руководство пользователя страница 6

Page 6

For technical questions, please call 1-888-866-5797.

Item 63769 

        

S

AFET

y

O

PERA

T

iO

n

M

A

in

TE
n

A

n

CE

S

ET
u

P

19.  Stay alert, watch what you are doing and 

use common sense when operating.  Do not 
use a winch while you are tired or under the 
influence of drugs, alcohol or medication.  
A moment of inattention while operating winches 
may result in serious personal injury.

20.  Do not overreach.  Keep proper footing and 

balance at all times.  This enables better control 
of the winch in unexpected situations.

21.  Hook onto the object using a pulling point, tow 

strap or chain. Do not wrap the wire rope around 
the object and hook onto the wire rope itself. 
This can cause damage to the object being 
pulled, and kink or fray the wire rope.

22. 

Do not use a Recovery Strap while 
winching.

  They are designed to stretch 

and can suddenly whip back towards the 
operator during a winching operation.

23.  Secure load after moving.   

NO LOCKING MECHANISM.

24.  Keep at least 5 full turns of wire rope on 

drum.  The wire rope’s connection to the 
drum is not intended to sustain a load, 
without the added support from the friction 
of at least 5 full turns of wire rope.

25.  Wrap wire rope under 500 lb. tension before use.  

Otherwise, wire rope may bind during operation.

26.  Keep clear of wire rope, hook, and load while 

winching.  Do not step over wire rope.   

Do not push sideways against wire rope 
under tension; wire rope might break under 
this load and recoil back, striking the 
person pushing against it or a bystander.

27.  If wire rope begins to get entangled, stop winch 

immediately and release wire rope using switch.

28.  Do not submerge winch in water.   

If winch gets submerged accidentally, it needs 
to be immediately disassembled, cleaned, dried 
and re-lubricated by a qualified technician to 
prevent permanent damage from corrosion.

29. 

Only winch with the winching vehicle′s 
transmission in neutral.  Winching with a vehicle′s 

transmission in gear or park may damage 

the transmission.  A vehicle′s transmission is 

not designed to handle that type of load.

30.  Do not operate the winch at extreme angles.  

Do not exceed the angles shown in Figure B for 
a roller fairlead.  For a hawse fairlead, the angle 
should be as close to straight as possible.

45°

45°

15°

15°

Figure B:  Roller Fairlead Maximum Winching Angles

31.  If the object to be pulled must be pulled at an 

angle in relation to the winch, use a pulley 
(sold separately) and an anchor point directly 
in front of the winch, as shown in Figure C, 
to keep the Wire Rope pull straight.

Figure C:  Pulley Anchoring

32.  Broken strands of wire rope will be sharp.  

Wear heavy-duty work gloves when handling 
the wire rope.  Do not slide wire rope 
through hands, even with gloves on.

33.  Winch motor will be hot during and after use.   

Keep clear.

34.  Do not power the hook all the way 

into the fairlead or winch.

35.  People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 
close proximity to heart pacemaker could cause 
pacemaker interference or pacemaker failure.

Содержание ZXR9000

















Отзывы: