Badger Meter LM-OG-P2 Advanced, Инструкция по установке и эксплуатации

Страница: 33 / 48

Meter operation / Operating mode functions page 30/43
LM_OGP2Adv_BA_99_1104
Re-settable total
NOTE: In the count up option the meter counts up to
the preprogrammed batch amount. In the count down
option the meter counts from the programmed batch
amount down to zero. Batch number 3 is always in the
count down mode.
Count down arrow
2. Press the button to lock in the batch quantity when batch size is selected. The
screen flashes and the batch number icon no longer displays.
•
If the meter is in count up mode, the display shows
zeros.
Count up mode
•
If the meter is in the count down mode, the desired
batch size appears on the screen.
Count down mode
7. Operating mode functions
These functions operate the same in manual mode and auto batch mode.
7.1 Resettable / accumulated totals
1. To see the accumulated total and the resettable total:
• Press and hold the button to see the accumulated total.
• Continue holding the button.
• After three seconds the screen changes to the resettable total.
2. "Reset total" displays the total fluid dispensed since
the resettable total was last set back to zero.
3. Press the button while viewing "Reset total" to
set it back to zero.
4. Release the button to return to the operating
screen.