Setting a PIN
The iSonic 4000 flow meter security feature allows the option to restrict access to the meter by way of a 6-digit Personal
Identification Number (PIN) The system administrator can set up a single PIN for each of the three different levels of access:
•
Administration
– allows access to all iSonic 4000 flow meter menu configuration screens
•
Service
– allows access to service-level and user-level menu configuration screens
•
User
– allows access only to user-level menu configuration screens
OTEE:
N
For a lost PIN, Contact Badger Meter Technical Support at 800-456-5023 for a replacement PIN
Not all levels of access need to be set If no PINs are set up, any user will have access to all functions
1 From the
Main Menu
, press the
right-arrow
2 From the
Meter Setup
menu, press the
up-arrow
until the
Pin
menu is displayed
3 Press the
right-arrow
to display the PINS
Control
menu
4 Press the
right-arrow
to highlight ON or OFF
5 With either ON or OFF highlighted, press the
up-arrow
to display ON
6 Press
EXIT SAVE
to save the ON setting
7 With the
Control
menu highlighted, press the
up-arrow
to display the required security level (user, service, or admin)
8 With the required security level highlighted, press
EXIT SAVE
to display the first of six zeros (digits)
9 Press the
up-arrow
to change the first digit, followed by pressing the
right-arrow
to select the next digit
10 Press the
EXIT SAVE
button to save the PIN number for that security level
Logging In
To change any parameter, the PIN entered must provide the proper security privilege required by the parameter
To enter a PIN, go to the
Login
menu and enter the PIN for the required security level
Once you are properly logged in, the unlocked icon appears on the meter display
OTEE:
N
A
PIN Error
message displays if the incorrect PIN is entered
Logging Out
To log out, follow steps 1 through 8 under
At step 9, enter an invalid PIN, then press
EXIT SAVE
Operation
Page 13
November 2018
HYB-UM-02509-EN-04
