Badger Meter Impeller ModHopper R9120-5, Руководство пользователя, Страница: 11 / 16

Modbus Features
135 40136 UINT16 Radio Serial MSW
136 40137 UINT16 Radio Serial LSW
137 40138 UINT16 Radio Firmware
138 40139 UINT16 Radio Type 1=R9120-1(lowpower), 2=R9120-3(highpower) 0=unknown)
139 40140 UINT16 (R/W) Modbus 485 timeout in ms. Default 240ms range 40max to 2000ms.
Affects modhopper in master mode only.(max 5000ms in v1.17)
140 40141 UINT16 (R/W) Pulse KYZ flag bitmap. 0x01 = pulse1 kyz mode, 0x02=p2, etc.
141 40142 UINT16 Reserved
142 40143 UINT16 (R/W) RS485 force master/slave modes. 0=auto/default, 1=force-mas -
ter, 2=force-slave. (firmware 1.17 or later)
143 40144 UINT16 RS485 master/slave mode status. 0=master, 1=slave. (firmware
1.17 or later)
144 40145 UINT16 RS485 baud rate.2=9600, 3=19200.(firmware 1.17 or laer)
145 40146 UINT16 (R/W) contact closure threshold. in ohms. 100-2550 ohms allowed.
(rev-c only, firmware 2.02 or later)
146 40147 UINT16 (R/W) contact closure speed, pulse speed: 0=10Hz/default, 1=50Hz,
2=100Hz, 3=250Hz(firmware 2.02 or later)
147 40148 UINT16 power supply voltage monitor (rev-c only) scale: x100
148 40149 UINT16 pcb temperature monitor(rev-c only) scale: x100
149 40150 UINT16 400MHz RX Good packet count(rev-c only)
150 40151 UINT16 400MHz RX Bad packet count(rev-c only)
151 40152 UINT16 (R/W) minimum packet time, how frequent to save sensor data packets.
(10-2550 seconds)(firmware 2.02 or later)
152 40153 UINT16 RS485 serial port option:(firmware 2.05 or later) bits 0-1:
0=N, 1=E, 2=O
bit 2: 0=8bit, 1=7bit
bit 3: 0=1stop, 1=2stop
Note: read only, always returns 8N1
153 40154 UINT16 Radio RF speed mode (0=distance, 1=speed) (rev-c, -5
modhopper only, fw 2.05 or later )
154 40155 UINT16 Reserved
155 40156 UINT16 (R/W) preference lock.0=unlocked, 1=locked. when locked, preferences
can be changed from 485 port only.(firmware 2.05 or later)
156 40157 UINT16 AES Encryption key present.
0=not available, 1=not-active,2=key-active/256bit. (firmware
2.05 or later, -5 modhopper only)
157 40158 UINT16 Max allowed software RF channel setting.0=not available. (firmware
2.06 or later)
712 40713 UINT16 bitmap of known radios (16 registers) LSB, MSB order.
bit0=n/a, bit1=addr1, etc.
Page 11 June 2016 XMT-UM-02107-EN-01