Installation Manual
RJ45 Plug Assembly (for LAN connectivity only)
NOTE:
N
Do
not
use a serial-to-LAN adapter!
Figure 21: Serial-to-LAN adapter kit
Required Supplies:
•
RJ45 Plug Assembly (66527-001)
•
Ethernet cable cord set using outdoor rated Cat .5e cable and RJ45 jack (customer supplied)
•
Wrenches, 1-1/16 inch (customer supplied)
Metallic Housing Insulator Insert Halves Cable Gland
Figure 22: RJ45 plug components
1 . Feed the cord set cable through the dome nut end of the cable gland .
2 . Push down the RJ45 plug latch and place it inside one half of the insulator insert .
RJ45 PLUG
LATCH
HALF INSULATOR
INSERT
HALF INSULATOR
INSERT
RJ STOP®
PATENT
AUDIBLE
LOCKING
Figure 23: Insulator assembly
3 . Attach the other half of the insulator insert as shown . You will hear a ”click“ when the connection is made .
Page 21
February 2014
