Programming
Page 27
May 2020
DSY-PM-01378-EN-08
Select Flow Rate Units*
At the
RateUnt
prompt, press
ENTER
� The monitor flashes the current rate unit� If the
current selection is correct, press
ENTER
to advance to the next parameter� To change to
an alternate unit, press
UP
or
RIGHT
to scroll to the required rate unit and press
ENTER
to
advance to the
TotlUnt
parameter�
Select Total Units of Measure*
At the
TotlUnt
prompt, press
ENTER
� The monitor flashes the current total units� If the
current selection is correct, press
ENTER
to advance to the next parameter� To change to an
alternate unit, press
UP
or
RIGHT
to scroll to the required totalization unit� Press
ENTER
to
advance to the
TotlMul
parameter�
Select Total Multiplier*
This parameter displays the accumulated flow total in multiples of 10� For example, if the
optimum totalization unit is 1000 gallons, the unit total display increments by one digit
for every 1000 gallons monitored� In Run mode, at 1000 gallons the total monitor reads 1,
at 3000 gallons, the total display reads 3� This feature eliminates having to look at a total,
count the digits, and mentally insert commas for each 1000 multiple�
At the
TotlMul
prompt, press
ENTER
� The monitor shows the current total multiplier� If
the selection is correct, press
ENTER
to advance to the next parameter� To change to an
alternate multiplier, press
UP
or
RIGHT
to scroll to the required multiplier unit and press
ENTER
to advance to the next parameter�
If the
RateUnt
or
TotlUnt
parameter has been set to pounds or kilograms, the monitor
advances to the
Spec Gr
parameter� At any other setting, the monitor advances to
PulsOut
in
Programming mode� See
