Now put the upper stamp underneath the
Flexi-holder, so that the distance bolt on the
swivelling plate is exactly between the two
split pins of the upper stamp.
Now the upper stamp has to be put into the
Flexi-holder. Therefor, the retaining pin in the
upper stamp has to be put into the hole in the
bridge which you can see if you take a look
at the bridge from above. Put the retaining
pin into the right position until it is exactly in
this hole and then push the upper stamp up-
wards until you hear a “click”. It is best if you
push against the Flexi-holder with your two
thumbs at the same time.
FIRST STEPS
12
English
