Using an External Antenna
To connect an external
antenna, remove the top
cover by leaning it towards
the back of the unit. With
the top cap removed,
unscrew the helical
antenna by rotating it
counterclockwise as seen
from the top of the Bad Elf
Flex.
The top connector utilizes a
standard SMA connector.
Attach your antenna using
a 50 ohm cable.
Ensure the antenna being
connected does not exceed
the voltage and current
limits defined in the
Height Reference
For measurements along the Z-axis, height reference, use the diagram below to assist in
determining your height offset.
Copyright © 2021. Bad Elf, LLC.
43
All Rights Reserved.
Содержание Flex BE-GPS-5500
