Bad Boy CZT, Руководство владельца, обслуживания и запасных частей

Страница: 13 / 52

SERVICE SECTION
SECTION 1: HYDROSTATIC SYSTEM
The hydro overflow tank on the Outlaw model is located
behind the seat. Notice the “full cold” line at the
bottom of the tank. Use only 20w50 motor oil in this tank.
Conventional or synthetic oil may be used.
When servicing a mower with a sealed transaxle unit,
start by removing the filter skid plate on the bottom of
each unit. The skid is held on by three 10mm bolts. Next,
remove the filter (Outlaws have one large nut on the
filter cover). The filter also serves as the oil drain. Each
transaxle holds about 2 quarts of hydro oil. (Outlaw holds
4 quarts in each transaxle) reinstall new filters and skid
plates. Use only hydro-gear filters. Use of any other type
of filter will result in damage to the hydro system and void
the warranty. Transaxle service recommended within the
first 50 hours of usage and every 250 hours thereafter or
once a year.
Shown right is the 5400 Outlaw transaxle. The large cap
on the lower left is the filter housing cap.
5400 filter housing cap. (do not over tighten)
PAGE 13