background image

4

-

10

BAD BOY TRACTOR

PARKING BRAKE & BRAKE IN-

DICATOR

(1) Parking Brake (Brake) Indicator

This comes on when the parking 

brake is applied or the brake ped-

al is depressed. [US] This comes on 

when the parking brake is applied 

only. [EU]  If the parking brake is ap-

plied, release the parking brake lever 

before driving. However, the lamp 

on the right side does not come on if 

only one side brake is released. 

ENGINE OIL PRESSURE 

WARNING LAMP

Lamp will come on when the ignition 

switch is put into the “ON” position. It 

will turn off when the engine is started.

If this lamp comes on while the engine 

is running, it indicates a problem in the 

engine oil system. Stop the engine im-

mediately and check for problems.

(1) Engine Oil Pressure Warning Lamp

111

111

BATTERY CHARGE WARNING LAMP 

The battery charge warning lamp is 

turned on when the ignition switch is 

initially turned to the "ON" position be-

fore starting the engine but turned off 

after starting the engine. If this lamp 

comes on while driving, the charging 

system is malfunctioning. In this case, 

check the fan belt or ask your local 

dealer for further inspection if neces-

sary.

(1) Battery Charge Warning Lamp

2024h_3026h.indb   10

2024h_3026h.indb   10

2020-09-18   오후 6:17:21

2020-09-18   오후 6:17:21

Содержание 2024H 2021

























































































































































Отзывы: