NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. —Consult
the dealer or an experienced radio/TV technician for help.
The FCC requires the user to be notified that any changes
or modifications made to this device that are not expressly
approved by KHN Solutions Inc may void the user’s authority
to operate the equipment.
ENG 21
ENG 22
RF EXPOSURE WARNING STATEMENT:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF
exposure compliance.
The information in this guide may change without notice. The
manufacturer assumes no responsibility for any errors that
may appear in this guide.
RSS-GEN, ISSUE 4, NOVEMBER 2014:
This device complies with ISEDC license-exempt RSS
standard(s). Operation is subject to the following two
conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received,
including interference that may cause undesired
operation of the device.
