Owner's Manual
Tools Required for Installation
You will need to make sure that your
assembly is square before tightening
your bolts.
This icon shows the size of an open
ended wrench. Using the wrench as
the fraction bar.
Some steps in the assembly process
will require an extra set of hands. Make
sure you have a helper available.
For proper assembly you will need to
ensure that your structure is level
before proceeding to the next step.
When you see this icon you
will need a socket wrench.
The icons below show the size
of attachments needed for
assembly.
This icon will show you what
drill attachments are needed.
For this example you will need
a Phillips head attachment,
1/4 driver, and 1/8 drill bit.
This icon warns you to not over
tighten your bolts. This is to
prevent structural damage and
also splitering your wood.
Icons and their uses you will see throughout this manual
11
