Backyard Products Yardline BELLINGHAM GABLE 10' x 16', Руководство пользователя

Страница: 13 / 90

11
Move to the opposite side. Using the long edge of the panel as a lever, move the panel side-to-side until the top
corner is flush to the floor frame (Fig. B) . Secure panel with two 2" nails in the corners.
2
BEGIN
1
3
4
Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
Ensure your floor frame is square by installing one panel and squaring frame.
Fig. C
Check the floor frame is square by measuring diagonally across the frame corners. If the measurements are the
same your floor frame is square. The measurement will be approximately
226-7/16" (575,2 cm)
(Fig. C) .
PARTS REQUIRED:
x1
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
x62
2" (5,1 cm)
FLOOR PANELS
226-7/16"
(575,2 cm)
226-7/16"
(575,2 cm)
Attach the 48 x 96" panel with the rough side up (painted-grid lines side) with the 48" edge and corner flush
to the floor frame
(Fig A)
. Secure panel with two 2" nails in the corners.
Flush
(2)
Nails
96"
(243,8 cm)
192"
(487,7 cm)
6"
(15,2 cm)
12"
(30,5 cm)
Grid lines up
12"
(30,2 cm)
Flush
(2)
Nails
Fig. A
Flush
3/4"
(1,9 cm)
Fig. B