![background image](http://html1.mh-extra.com/html/backyard-products/shedmaster-gable/shedmaster-gable_assembly-manual_3357550026.webp)
24
PARTS REQUIRED:
BACK WALL INSTALLATION
3" Nails into bottom
plate.
Fig. B
Secure lower edge of panels to floor frame
with 2" nails spaced 6" apart.
Angle nail into floor frame
(Fig. A)
.
2
Secure back wall bottom plates to floor with 3" nails.
Secure back wall center upright to floor
with (2) 3" screws
(Fig. B)
.
Secure back wall top plate to side wall top plate
with (2) 3" nails.
Secure back wall panel to side wall stud with 1-1/2" nails
spaced 6" apart.
Secure back wall inside horizontal support to side wall stud
with (2) 3" screws
(Fig C)
.
3
4
5
6
7
6"
(15,2 cm)
6"
(15,2 cm)
DO
OR
DO
OR
3" (7,6 cm)
x8
2" (5,1 cm)
x18
Center back gable wall on the floor.
BEGIN
1
Secure wall with (1) 2" screw into side wall stud and top plate.
Secure wall to stud first.
ENSURE SIDE AND BACK PANELS ARE
EQUALLY SPACED ALONG CORNER.
Your back wall is now installed.
FINISH
1-1/2" (3,8 cm)
x11
2" (5,1 cm)
x2
Equally Spaced
Nail 2" nails first.
2"
(5,1 cm)
Nails
3"
(7,6 cm)
Nails
Fig. A
3" (7,6 cm)
x4
(2) 3"
(7,6 cm)
Screws
Fig. C
3"
(7,6 cm)
Screws
1-1/2"
(3,8 cm)
Nails
2"
(5,1 cm)
Screws
2"
(3,8 cm)
Nails
3"
(7,6 cm)
Nails