![background image](http://html1.mh-extra.com/html/backyard-products/heartland-coronado-12x8/heartland-coronado-12x8_assembly-manual_3353988030.webp)
96”
(243,8 cm)
96”
(243,8 cm)
28
HINT:
Use foor and walls to help
assemble rafters!
2
You will build (7) rafter assemblies; (2) rafters will have only (1) gusset.
Place (2) rafter-halves into corners on bottom plates
flush to gable wall studs and flush to front and back wall panels.
Secure gusset to rafter with 2" nails in the pattern shown. Maintain 1/4" gap
(Fig. A, Fig. B)
.
Repeat STEP 1 to build (1) more rafter with only (1) gusset.
Set these (2) rafter assemblies aside for later use.
Place (2) rafter-halves into corners on bottom plates
flush to gable wall studs and flush to front and back wall panels.
Secure gusset to rafter with 2" nails in the pattern shown. Maintain 1/4" gap
(Fig. A, Fig. C)
.
Turn rafter assembly over. Nail second gusset to back side of rafter.
Repeat STEP 2 to build (5) more rafters with (2) gussets.
FINISH
Your rafters are now assembled.
PARTS REQUIRED:
RAFTERS
2" (5,1 cm)
x144
x12
6 x 23-1/4" (15,2 x 59,1 cm)
x14
2 x 4 x 55-3/16" (5,1 x 10,2 x 140,2 cm)
AA
AA
Fit base of rafter fush to back wall studs
and wall panels.
Gap
1/4" (6 cm)
CENTER
Use a 2x4 as a support
96"
(243,8 cm)
Touch at peak.
BEGIN
1
Fig. A
Flush
to panel
Flush
to panel
Fig. B -
Build 2
Fig. C -
Build 5
Содержание HEARTLAND CORONADO 12x8
Страница 2: ...This page intentionally left blank...