Backyard Products Handy Home MAJESTIC 8' x 12', Инструкция по сборке

Страница: 43 / 67

HINT:
Clamp in position
before screwing.
41
GABLE TRIM
FINISH
6
Position one AG 1-1/4" up from front panel edge and center with panel
seam (Fig. A) . Attach trim with seven 1-1/4" screws from inside. Install two
screws at seam (Fig. B) .
Position second AG 1-1/4" up from panel edge and fl ush to AG already at-
tached (Fig. A) . Attach trim with seven 1-1/4" screws from inside. Install two
screws at seam (Fig. B) .
Repeat steps 3-4 to attach the back trim.
You have attached your upper trim.
4
3
5
DOOR
AG
x4
2 x 4 x 59-1/8" (5 x 10 x 150 cm)
PARTS REQUIRED:
Line up
seams.
Pre-marked
Line
AG
AG
7" (18 cm)
Appro
ximately
Fig. A
Fig. B
Flush
NOTE: Upper gable panels may be slightly offset from lower panels. If
this occurs, mark a line on upper panel to match lower wall panel (Fig. B).
x28
1-1/4" (3,2 cm)
1-1/4"
(3,2 cm)
1-1/4"
(3,2 cm)
Mark
1-1/4"
(3,2 cm)