![background image](http://html1.mh-extra.com/html/backyard-products/cosmopolitan-10x4/cosmopolitan-10x4_assembly-manual_3345090058.webp)
56
Flush
1-3/4"
(4,4 cm)
1-3/4"
(4,4 cm)
DOOR HARDWARE
Measure to
center of holes.
Install left door bumper to measurement shown. Measure from edge of corner trim.
Locate bumper hole-center 1-3/4" above bottom edge of wall panel
(Fig. A)
.
Secure door bumper with 1-1/4" screws.
Pre-drill screw holes.
Install right bumper to door trim and
FXA
. Locate right side of door 1" (2,5 cm) from right edge of door trim
(Fig. A)
.
Locate bumper hole-centers 1-3/4" above
bottom edge of corner trim.
Flush door bumper to right edge of door
(Fig. A)
.
Secure door bumper with 1-1/4" screws.
Pre-drill screw holes.
Install door bumper trim block
FXA
between door trim and
corner trim, flush to bottom of corner trim.
Secure with 2" finishing nails.
PARTS REQUIRED:
BEGIN
¸
1
x2
1/8" BIT
(3 mm)
76-916"
(181,3 cm)
Fig. A
Door Trim
DOOR
CORNER TRIM
x4
1-1/4" (3,2 cm)
x1
FXA
19/32" x 3-1/2" x 2-7/16" (1,5 x 8,9 x 6,2 cm)
x2
2" (5,1 cm)
2
3
2"
(5,1 cm)
Finishing nails
J-Channel
Guide Bracket
Flush
Door Bumper
FXA
1-3/4"
(4,4 cm)
1"
(2,5 cm)