background image

 15

OPERATION

HOW IT WORKS

A. All natural wood pellets are poured in the hopper. (3)
B. Turn Temperature Dial to the (1) "STAND BY" 

setting and Power Switch to the "OFF" position.

C. 

Plug

 the smoker / grill into a grounded, 110-

120Volt, electrical outlet.

D� 

Open the main lid, then using the Temperature 

Dial, select SMOKE (1).

• 

Auger (6) begins to feed pellets from the 

Hopper (3) to the Burn Pot (8). 

• 

The Igniter (7) or hot rod, activates for 5 minutes, and along 

with the Draft Fan (5) ignites the pellets.

• 

The Draft Fan (5) causes the pellets to burn, clean and intense.

E� 

The Draft Fan (5) also causes heat and "clean" wood smoke 

to 

surround the food, known as convection cooking.

F.  The wood pellet fuel burns in the Burn Pot (8). The fly ash and the flames hit the Flame Broiler (10) 

and are directed toward the ends of the barrel.

• 

  The fly ash is collected in the bottom of the barrel and 

should be cleaned out periodically.

G� 

Drippings from the food hit the hot Flame Broiler / Flavor 

Enhancer (10), vaporizing back into the food.

• 

The  excess drippings are channeled from the Grease Chute 

(18) to the external bucket (19) for easy disposal.

H� 

Select the desired cooking temperature (1)

• 

200°F, 225°F, 250°F, "Hot Smoke" fish, ribs, briskets

• 

300°F to 350°F, "Bake or Slow Roast" chicken, lamb,

• 

350°F to 400°F, "Bake" breads, cookies, desserts

• 

400°F to 475°F, "Bake or braise" pizzas, beef, veggies

• 

500°F, "Steak House Sear" your steaks, burgers, dogs

I.  When finished grilling or smoking your food, simply lift the lid 

and turn the dial to (1) OFF.

SAFETY TESTING

In accordance with the procedures and specifications listed in UL SUBJECT 2728-2009 "PELLET 

FUEL COOKING APPLIANCES"AND CANADIAN ULC/ORD C2728 and CSA C22.2 #3 "FOR ELECTRICAL 

FEATURES OF FUEL BURNING EQUIPMENT", The Backyard Pro pellet cooking appliance has been 

independently tested and listed by INTERTEK (an accredited testing laboratory) to ETL,UL,ULC 

and CSA standards.

Содержание 554PL2026





























Отзывы: