61
Anchor-It
Anchor-It Strap
1-1/2” Lag
Screw
5/16” Washer
5/16’’ x 1-1/2” Lag Screw (x4)
Fold up
3ODFHVZLQJVHWLQ¿QDOORFDWLRQDQGPRXQW$QFKRU,WVDWORFDWLRQVFLUFOHGDERYH
2. Twist the Anchor-It into the ground until only the loop is exposed.
3. Place Anchor-It Strap thru loop, fold the ends together and attach to the unit as shown.
Note: Keep as little play as possible using any of the holes in the strap that work best.
TIP: When installing Anchor-Its in rocky or hard soil, create a starter hole at the desired locations using either a 16’’ Concrete
Drill Bit, or a long screw driver then insert and install the Anchor-Its as shown. This will allow you to get traction with the Anchor-It
faster and allow the device to seat more securely.
STEP 51
Содержание PB 8326
Страница 22: ...22 STEP 11 1 Attach Barrier Board as shown PF 6169 5 8 x 3 3 8 x 31 1 2 26 2 1 2 Deck Screw x4 4 2 1 2 Screws ...
Страница 39: ...39 STEP 28 1 Attach Window Frame as shown 3 4 Flat Head Screw x10 10 3 4 Flat HeadScrews ...
Страница 46: ...46 1 Attach Rock Wall Board as shown STEP 35 2 Deck Screw x4 4 2 Deck Screws 1 PF 6085 5 8 x 5 3 8 x 19 1 2 2 ...