Backyard Discovery GRANADA 2206090, Руководство пользователя

Страница: 45 / 83

STEP 3A: CONSUMER DRILL TEMPLATE
USE TEMPLATE TO PRE-DRILL PILOT HOLES ON POST
(DON'T DRILL UNTIL STEP 3B)
STANDARD BAR
HEIGHT TEMPLATE
STANDARD COUNTERTOP
HEIGHT TEMPLATE
•
ALL PILOT HOLES SHOULD BE DRILLED USING A 6 mm [1/4 in] DRILL BIT AT A DEPTH OF 15 mm [ 5/8 in].
•
USE FRONT SIDE OF TEMPLATE FOR STANDARD BAR HEIGHT OR BACK SIDE FOR STANDARD
COUNTERTOP HEIGHT.
•
MAKE SURE YOU ARE USING THE CORRECT DRILL TEMPLATE FOR YOUR SELECTED TABLE HEIGHT.
•
PILOT HOLE TEMPLATE WILL REST DIRECTLY ON THE TOP EDGE OF THE METAL POST PLATE.
UPPER RAIL
PILOT HOLES
LOWER RAIL
PILOT HOLES
NOTE: DRILL TEMPLATE WILL BE USED MULTIPLE TIMES AND MUST BE RETAINED THROUGHOUT ENTIRE
ASSEMBLY.
FOOT REST
PILOT HOLES
TOP OF METAL
POST PLATE
TOP OF METAL
POST PLATE
FOOT REST
PILOT HOLES
LOWER RAIL
PILOT HOLES
UPPER RAIL
PILOT HOLES
45