Backyard Discovery GABLE 8' x 8', Инструкция по сборке

Страница: 38 / 56

ROOF PANELS
Move to the opposite end. Using the long
edge of the panel as a lever move the
panel side-to-side until the top corner is
ush to the peak
(Fig. C) and there is 1/2"
measurement to the gable trim (Fig. D) .
You may need to move your backwall to
get the 1/2" measurement. Secure panel
with two 2" nails in the corners.
2
You must square the roof by attaching one panel rst. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury
until securely fastened.
Attach the 48 x 96" panel with the rough
side up (painted-grid lines side) with a 1/2"
measurement on the gable trim
(Fig A) and
the panel ush at the peak (Fig. B) .
Secure panel with two 2" nails in
the corners.
1
BEGIN
Two Nails
48"
(121,9 cm)
1/2"
(1,3 cm)
1/2"
(1,3 cm)
Flush at peak.
Fig. B
Gable
Trim
Gable
Trim
Fig. D
Flush at peak.
Fig. C
2" (5,1 cm)
PARTS REQUIRED:
x8
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
x2
Fig. A
36